In a previous post I showed how to do Decibel (dB) calculations when both the input power and output power are known for a transmission system. We learned that a 50% decrease between input and output power results in a power loss of -3 dB with the negative sign indicating the loss in power.
Where Psignal in Watts is the signal strength measured in Watts. This equation can be simplified using some basic math since 1mW is now a constant, yielding:
Pretty simple, the dBm level of a signal that has been measure in Watts is just ten times the base-10 log of the measured signal plus 30. It's actually so simple it's much more common to measure and indicate communications signals in dBm. In fact, you can take some measurements yourself if you happen to own an iPhone. Let's learn how.
The iPhone has the ability to go into something called Field Test mode. Once in this mode you can look at signal strength in both signal bars (what we are all used to seeing) and also in dBm. To put an iPhone into Field Test mode just punch in the following number on the phone keypad, including the "star" and "pound sign" keys:
After you punch these numbers and symbols in, hit the Call button on the keypad and you'll end up with your iPhone screen looking like this:
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEibyXJLOc-NvBoScVUIq_qPC0x8zyFsdgnh7K9O2IGeIuM3MCgQH4pHld0iZcYkNcuy0PIBXwIeuH3B7XaPt_6Es0rGOvRVt6vKpwFChzs_6-AOVuFEfr-DbmSeaYBkAAsQPdo0LNvkmqna/s400/Screen+shot+2010-01-26+at+2.33.51+PM.png)
Lots of interesting stuff here but - for now - let's ignore everything but the upper left hand corner of the screen. Take a look at where you usually see the signal bars and you'll see a negative number - this is the actual cell signal strength your phone is receiving in dBm referenced to 1 mW. In the above screen shot I'm measuring -113 dBm. Touch that signal strength number once and it toggles to the familiar signal strength bars:
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi0qTa3xiCrlIXPePakobPFO1nTb5QfRmiR87ElA4v9TaVzfX2I8fr8Ksh_hUeu-jNjr8pg3OnxVUvxQnal5ybRIDiLHv0aIxheto-RAj5Eyb7sQset6syluNfKnhdA0qUJbqqblk_vwGxa/s400/Screen+shot+2010-01-26+at+2.34.21+PM.png)
Touch it again and it flips back to the strength number. You get the idea. What constitutes a good signal? Here's some rough signal strength guidelines:
Optimal Signal:-70 to -75
Fair Signal:-75 to -85
Poor Signal: -85 or higher
This is interesting to experiment with - check your signal strength in different locations see and how it correlates to the numbers of bars you are getting. Does it match up? Not always based on my experience!
To exit out of Field Test mode on the iPhone just hit the Home button.
Have a Blackberry? (I don't so proceed with this one at your own risk) I've been told you can do something similar using the secret code Alt-NMLL to convert your bars to numbers. To convert back to signal strength bars just enter the same secret code again.
Have a phone other than an iPhone or Blackberry? Most phones will allow you to go into some sort of field mode to see actually signal strength numbers. Check your manual or do some searching on the web to find out how.
7/6/10 Update: This function appears to be disabled after completing the iOS 4 Software Update