Thursday, October 20, 2011

The SLC-96

In this post I continue discussing some of the different legacy technologies used by the Public Switched Telephone Network (PSTN). Today let's take a look at how the PSTN designed and tuned for voice communications started to change in the late 1970's with something called an SLC-96 (pronounced "Slick 96").
It's still not economical even today to run fiber into every home but Local Exchange Carriers like Verizon and AT&T have been working to replace portions of the local loop with fiber by running fiber out from the CO into a Remote Terminal (RT) pedestal box in the field called a Multiple Subscriber Line (or Loop) Carrier System or SLC-96. Each SLC-96 takes 96 64 Kbps analog voice or modem signals, converts them to digital and then multiplexes them at the Remote Terminal. The Remote Terminal is connected to a Central Office Terminal (COT) using 5 T1 (DS-1) lines. 


SLC-96 Field Pedestal Configuration


Four of these T1 lines are used to carry the 96 digitized voice channels (1 T1 line = 24 digitized voice channels so 4 T1’s are required to transmit 96 voice channels). The fifth T1 line is used for protective switching and is a backup if one of the four fails.

In my next legacy PSTN post I'll start covering multiplexing.

No comments:

Post a Comment